MULTIBAND V-BELTS 3V 1000 RIB 3
Item No.
MB3V10003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Description
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Number of bands: | 3 |
Type: | Multiband |
Lenght (inches): | 1000 |
Material: | Rubber |
Net Weight (Kg): | N.A. |
DUPLEX SPROCKETS ASA 60 Z=017
Item No.
PD11A17
WORM GEARBOX: VTS 049 P R45 F11 U
Item No.
VTS04945F11
RAW EDGE V-BELTS AX 44 DEV. 1120
Item No.
AX44
TRIPLEX TAPER-B. SPROCKETS 3/4X7/16 Z=038
Item No.
TT11038