METRIC TAPER BUSHES 5050 BOR. MM. 75
Item No.
5050075
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws. They are designed for use with: Chain sprockets V-belt pulleys Timing belt pulleys Flexible couplings HRC couplings Weld-on hubs NB: the photo on the left is indicative only and
Description
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws.
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Bush | 5050 |
Bore (mm): | 75 |
Material: | Cast iron phosph |
Net Weight (Kg): | 15.9 |
DUPLEX PLATEW.FOR TWO SINGLE CH. 12B1 (TL) Z=014
Item No.
DT11014
HALF-COUPLING W. LARGE TAPE END HRC180 2517
Item No.
HRCE180
HTD DOUBLE TOOTHED TIMING BELTS 1120 8M 20 Z=140
Item No.
DD11208M20
V-BELT PULLEY POLY-V TAPER PL 75-8
Item No.
LT0758