METRIC TAPER BUSHES 5040 BOR. MM. 125
Item No.
5040125
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws. They are designed for use with: Chain sprockets V-belt pulleys Timing belt pulleys Flexible couplings HRC couplings Weld-on hubs NB: the photo on the left is indicative only and
Description
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws.
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Bush | 5040 |
Bore (mm): | 125 |
Material: | Cast iron phosph |
Net Weight (Kg): | 7.5 |
SIMPLEX SPROCKETS ASA 100 Z=010
Item No.
PS13A10
HALF-COUPLING W. SMALL TAPE END HRC110 1610
Item No.
HRCI110
RAW EDGE V-BELTS CX 75 DEV. 1905
Item No.
CX75
STAINLESS STEEL SPROCKETS 1/2X5/16 Z=023
Item No.
PS09X23