METRIC TAPER BUSHES 3020 BOR. MM. 55
Item No.
3020055
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws. They are designed for use with: Chain sprockets V-belt pulleys Timing belt pulleys Flexible couplings HRC couplings Weld-on hubs NB: the photo on the left is indicative only and
Description
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws.
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Bush | 3020 |
Bore (mm): | 55 |
Material: | Cast iron phosph |
Net Weight (Kg): | 2.19 |
TRIPLEX SPROCKETS 1"X17,02 Z=029
Item No.
PT12029
HALF-COUPLING W. LARGE TAPE END HRC110 1610
Item No.
HRCE110
SPUR GEAR WITHOUT HUB MOD. 4 Z=041
Item No.
CM31041
TIMING BELTS 728 L 050 DEV.1849,12 Z=194
Item No.
728L050