METRIC TAPER BUSHES 2517 BOR. MM. 18
Item No.
2517018
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws. They are designed for use with: Chain sprockets V-belt pulleys Timing belt pulleys Flexible couplings HRC couplings Weld-on hubs NB: the photo on the left is indicative only and
Description
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws.
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Bush | 2517 |
Bore (mm): | 18 |
Material: | Cast iron phosph |
Net Weight (Kg): | 1.58 |
DUPLEX SPROCKETS ASA 40 Z=026
Item No.
PD09A26
TIMING BELTS 1400 XXH 500 DEV.3556 Z=112
Item No.
1400XXH500
METRIC TAPER BUSHES 4545 BOR. MM. 80
Item No.
4545080
SINGLE OUTPUT SHAFT 150
Item No.
AS150