METRIC DOUB.TOOT. T.SLEEVES DT10-700 W. 300
Item No.
MDT10700
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Description
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Type: | MANICOTTO2DENTMETR |
Width (mm): | 300 |
Number of teeth: | 70 |
Length (mm): | 700 |
Material: | Polyurethane |
Net Weight (Kg): | N.A. |
SIMPLEX C/IRON TAPER BORED SPR. 3/8X7/32 Z=076
Item No.
GS05076
HALF-COUPLING W. LARGE TAPE END HRC180 2517
Item No.
HRCE180
LOCKING SETS SERIE AA 28/55
Item No.
KLAA028
TIMING BELT PULLEYS HTD 5M-25 Z=024
Item No.
05M2524