INCHES TAPER BUSHES 2517 BOR. 1"1/8
Item No.
2510118
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws. They are designed for use with: Chain sprockets V-belt pulleys Timing belt pulleys Flexible couplings HRC couplings Weld-on hubs NB: the photo on the left is indicative only and
Description
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws.
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Bore range (inches): | 1"1/8 |
Bush | 2517 |
Material: | Cast iron phosph |
Net Weight (Kg): | 1.06 |
WHEELS TABLE TOP 1"1/2X1" Z=027
Item No.
RC14027
RAW EDGE V-BELTS AX 41 DEV. 1041
Item No.
AX41
TIMING B. PULLEYS TAPER B. HTD 14M-115 Z=034
Item No.
1411034
SIMPLEX PLATE WHEELS ASA 35 Z=048
Item No.
CS05A48