INCHES TAPER BUSHES 1610 BOR. 1"5/8
Item No.
1600158
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws. They are designed for use with: Chain sprockets V-belt pulleys Timing belt pulleys Flexible couplings HRC couplings Weld-on hubs NB: the photo on the left is indicative only and
Description
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws.
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Bore range (inches): | 1"5/8 |
Bush | 1610 |
Material: | Cast iron phosph |
Net Weight (Kg): | 0.41 |
V-BELT PULLEY W. SOLID HUB SPC 224-5
Item No.
CM02245
RAW EDGE V-BELTS XPC 3350 - 3380
Item No.
XPC3350
RED SPIDER 55/70
Item No.
ER55070
TIMING BELTS 360 MXL 025 DEV.91,44 Z=45
Item No.
360MXL025