INCHES TAPER BUSHES 1108 BOR. 5/8
Item No.
1100058
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws. They are designed for use with: Chain sprockets V-belt pulleys Timing belt pulleys Flexible couplings HRC couplings Weld-on hubs NB: the photo on the left is indicative only and
Description
Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws.
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
They are designed for use with:
Chain sprockets
V-belt pulleys
Timing belt pulleys
Flexible couplings
HRC couplings
Weld-on hubs
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Bore range (inches): | 5/8" |
Bush | 1108 |
Material: | Cast iron phosph |
Net Weight (Kg): | 0.16 |
DUPLEX PLATEW.FOR TWO SINGLE CH. 10B1 (TL) Z=012
Item No.
DT10012
RAW EDGE V-BELTS XPZ 2037
Item No.
XPZ2037
VARIATOR BELTS 22X8 DEV. 1900
Item No.
1900VR22X8
DOUBLE TOOTHED TIM.SLEEVES 540L Z 144
Item No.
MD540L