HTD DOUBLE TOOTHED TIMING BELTS 3150 14M 85 Z=225
Item No.
DD315014M85
• Available in imperial and metric size L, H, 8M, 14M • A hard wearing, flexible top surface protect tension cables • Tension cables made in continuous helically glass fiber . • Protective cover fabric with a low coefficient of friction, in order to achieve minimum wear on the contact
Description
• Available in imperial and metric size L, H, 8M, 14M
• A hard wearing, flexible top surface protect tension cables
• Tension cables made in continuous helically glass fiber .
• Protective cover fabric with a low coefficient of friction, in order to achieve minimum wear on the contact surfaces, and minimize noise
• Good resistance to oils and greases, and temperature between -25°C and + 100°C
• Power transmission and tolerance data are the same of single side belts
• A hard wearing, flexible top surface protect tension cables
• Tension cables made in continuous helically glass fiber .
• Protective cover fabric with a low coefficient of friction, in order to achieve minimum wear on the contact surfaces, and minimize noise
• Good resistance to oils and greases, and temperature between -25°C and + 100°C
• Power transmission and tolerance data are the same of single side belts
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
Type: | Double Side Timing Belt HTD |
Width (mm): | 85 |
Number of teeth: | 225 |
Length (mm): | 3.150 |
Material: | Rubber |
Net Weight (Kg): | 3.4808 |
TRIPLEX TAPER-B. SPROCKETS 5/8X3/8 Z=021
Item No.
TT10021
WHEELS TABLE TOP 1"1/2X1" Z=017
Item No.
RC14017
TIMING BELT PULLEYS T2,5-16 Z=026
Item No.
16T2026
DUPLEX SPROCKETS 2"X1"1/4 Z=012
Item No.
PD16012